Wholesale Prp Centrifuge Machine Amazon Manufacturers – MANSON MM10 Centrifuge with 6 Programs (PRP/PRGF/A-PRF/CGF/PRF/i-PRF) – Manson

Technical Parameters

Model	PRP200
Max. Speed	4000rpm
Max. RCF	1980xg
Max. Capacity	8 x 15ml
Speed Accuracy	±30rpm
Time Setting Range	1min to 99min
Noise	<62dB(A)
Power Supply	AC220V±22V 50/60Hz 2A
Total Power	100W
Dimensions (W x D x H)	320x370x235mm
Package Size (W x D x H)	530x410x290mm
Net Weight	11kg
Rotor Optional:
8x15ml

How to use it?

1. Checking the Rotors and Tubes: Before you use, please check the rotors and tuber carefully.
2. Install Rotor: You must make sure the Rotor is installed tightly before use.
3. Add Liquid in the tube and put the tube: The centrifugal tube should put symmetrically, otherwise, there will be vibration and noise because of imbalance.(Attention: the tube put should in even number, such as 2, 4, 6,8).
4. Lid close: Press down the door lid until you hear “clicking” sound which means the door lid pin enter into the hook.
5. Press the touch screen main interface to select the program.
6. Start and Stop the centrifuge.
7. Uninstall the rotor: When replacing the rotor, you should uninstall the used rotor, unscrewing the bolt with screwdriver and take out the rotor after removing spacer.
8. Shut off the Power: When the work is finished, then shut off the power and pull off the plug.

Installation Environment

1. Ambient temperature and humidity: The surrounding environment has a certain impact on the life and performance of the centrifuge. It is best to work in the allowable ambient temperature range (10℃~35℃), and the relative humidity is less than 80%.
2. It is required that there is no experimental equipment that generates a large heat source and a strong vibration source nearby.
3. Avoid installing in direct sunlight and humid places.
4. Avoid installation in places with corrosive, flammable, and explosive。gases in the air.
5. Avoid installation in places with oily, dusty, and metal dust.

Installation Steps

1. When you receive the goods, please check whether the appearance of the packing box is intact. If there is any damage, please negotiate with the freight forwarder and notify the company.
2. Open the outer packaging, carefully take out the centrifuge (along with the foam packaging), place it on a level and solid table, remove the foam packaging, and make the four legs of the centrifuge evenly contact the table.
3. Open the door cover: open the door cover by hand by pressing the door open button on the right side of the centrifuge (the door opening position can be seen in the host diagram); check the centrifuge room, take out the contents in the centrifuge room, and clean the centrifuge room.
4. Check the packing list: check whether the host, accessories, random tools, and random files are complete and correct.
5. Rotor installation: Take the rotor out of the packing box, carefully check whether the rotor is damaged or deformed during transportation, hold the rotor body with both hands, place the rotor vertically and steadily on the rotor seat, and then tighten the matching fixing with a Phillips screwdriver Rotor screw.
6. Confirm that the power supply voltage is consistent with the required voltage of the machine, connect the plug end of the power cord equipped with the machine to the socket on the centrifuge first, then insert the plug at the other end of the power cord into the external power socket, and switch the power on the back of the centrifuge Press one end marked “” to turn on the power.

Warning

Do not install the machine near flammable and explosive materials. Before the instrument is powered on, manually open the centrifuge door to inspect the centrifuge chamber; do not turn on the power before taking out the contents in the centrifuge chamber.

Company Profile

Factory Show